M2 hopper pump

The suction chamber is designed as a large hopper. The connecting rod is equipped with a spiral vane propulsion device, which can effectively prevent the accumulation of media at the pump inlet, greatly improve the ratio of media entering the rotor and stator, and improve the pump delivery efficiency. It is suitable for conveying materials with high viscosity, high solid content, and poor fluidity. The size of the hopper can be adjusted according to the customer's on-site installation requirements; It can transport sludge, biogas residue, soybean paste and other media with solid content ranging from 18% to 30%.

M2 hopper pump is suitable for conveying almost any liquid medium, including water, and is widely used in various industries.

In the environmental protection industry, it is used to transport dewatered sludge, mud cake, etc

Pump type: single head long lead, single head short lead; Double head long lead, double head short lead;

Stage: the maximum bearing capacity is 72 kg. If there are special requirements, it can be specially designed;

working principle:

As a positive displacement pump, it forms a seal chamber that is not connected with each other by the interference fit between the eccentric rotor and the fixed stator. Through the rotation of the rotor in the stator, the seal chamber moves axially from the inlet end of the pump to the outlet end, so that the medium in the seal chamber can be transported through the pump.

The structure and working principle of single screw pump determine that it is most suitable for conveying various complex media containing solid particles and fibers, viscous, corrosive, shear sensitive, gas and various harsh working conditions at different temperatures.